Smaller kerosene lamp in clear glass with burner tube in clear glass and burner in brass. Including a week.

INSTRUCTIONS FOR USE:

To fill with lamp oil and light the lamp:

The kerosene lamp must be switched off and cold when filling.

• Remove the burner tube and unscrew the burner.
• Fill with lamp oil, approx. 2/3 of the container. Feel free to use a funnel for smaller spills.
• Screw on the burner again and let the wick soak for 20-30 minutes so the wick gets wet.
• Switch on the lamp and adjust the flame so that it does not become too high by screwing the wick up or down
• Replace the burner tube

Note! The burner tube may need to be adjusted to stay straight. When the glass is straight, the metal clips on the burner are used to stabilize.

To turn off the light: Extinguish the kerosene lamp by blowing out the flame or unscrewing the wick.

Change week: The old wick is pulled out from below and the new one is inserted from below and screwed up to the correct height.

To think of: When the lamp is lit, the burner tube is very hot. Place the lamp on a flat surface and not near combustible material. Also leave free above the lamp, at least 1 meter.